Electric drill BORT BSM-500-P is a small low-power tool for home use. We are talking about home use, because due to the low power, it is simply deadly for the tool to perform significant amounts of drilling (except for soft materials such as plastic or wood or artificial materials based on it).
Not only will you drill each hole in the same steel plate or concrete for a very long time, but the engine will heat up mercilessly. After a couple of holes, it will be necessary to wait for the drill to cool down.
At the same time, for small household chores such as hanging shelves, assembling furniture (a drill can be used as a screwdriver, although some skill is needed, because the drill has an inertial motor effect and the bit will not stop immediately), drilling holes for dowels, etc. ..
Impact drill STAYER SID-650-E in the home tool kit is not the worst option. Despite the rather low price, this drill is quite suitable for various types of drilling that will need to be performed in your house or apartment.
Of course, this is not the best option, but nevertheless quite acceptable.
If we describe this STAYER drill, we can say that it is compact and lightweight. It is very convenient to work with it on scaffolding or a ladder when you need to work with various tools. Additionally, there is a special clip on the body of the electric drill, with which it is very convenient to hang the drill on the belt, while the hands are completely free for other types of work, and if the drill is needed again, it is always at hand.
If you are not a professional builder and do not plan to build your house, this does not mean at all that you will not need a construction tool for various small jobs in an apartment or house. An electric drill is a very important and necessary tool in a home kit. At the same time, as mentioned above, if a large load on the tool is not planned, then you should not overpay and buy an expensive drill.
You can always choose a fairly cheap model that will meet your requirements and not greatly facilitate your family budget. One of the models of electric drills, which has a reasonable price and will suit a lot of people, is the KOLNER KID 550 V impact drill.
We will try to briefly describe what this drill model is.
In principle, this is a fairly small drill, light and comfortable.
The DEFORT DID-505-B impact drill is a low-powered and small tool that is most likely not suitable for drilling thick metal and concrete structures due to the very low engine power.
Having looked at the technical characteristics of this impact drill declared by the manufacturer, any professional builder who has been drilling various materials will draw such a conclusion. 500 W of power is enough for drilling plastic and wood or products made from these materials, thin sheet metal, or metals with a low density (copper or aluminum), and from stone materials it will be possible to drill porous materials such as gas silicate blocks, bricks, plaster and similar materials.
At the same time, the drill has a function of impact drilling. It is equipped with a metal key chuck that securely clamps the drill from scrolling,
In this article, we describe another budget model of electric drills for home use. It's about the drill STAYER SID-550-E.
First, let's describe what this drill looks like. Like all other models from STAYER, this model is made in yellow.
The case itself is rather rounded and smoothed and completely made of yellow plastic. The controls are in grey. This applies to all buttons and switches. Well, a black additional handle.
Controls are located quite standard. This applies to both the start button with a flag for turning on the reverse and the button for fixing the speed of the drill, and switching the drilling mode.
Drill GRAD-M DU-505 is a classic example of a small compact power tool for a home tool kit. This domestic model has a classic layout and is equipped with a 500 W motor.
Speaking of the classic layout, we mean that all the elements of this drill are made according to the classical scheme. The start button with adjustable engine speed and a reverse flag is located on the handles, where the button for fixing the start button is also located on the side. From above, closer to the chuck attachment point, there is a round drilling mode switch.
At the same time, the designers did not reinvent the wheel and try to make this button less protruding beyond the case, but settled on the most reliable option.
The Sparky brand produces quality hand-held electric tools. Of course, it does not belong to a professional tool, but if you have purchased a tool of this brand, you can be sure that it will serve faithfully for many years. At the same time, it can be used not only for homework, but also for professional activities.
The Sparky line includes a light and powerful enough for its size electric planer SPARKY P 160. This tool has a 450 W motor, which is not much in principle, however, given that the planing depth of this planer is 1.5 mm, this is quite enough to obtain a high-quality processed surfaces. Due to the fact that the frequency of rotation of the drum with knives is 16,000 rpm, the surface of the wood is smooth and does not require additional processing with abrasive materials.
This article is devoted to another electric planer from the HAMMER line. It's about the HAMMER RNK900 tool.
The article about this tool will be quite large due to the fact that this tool is in the toolbox of the author of the article and has undergone a rather long “run-in” with practical work in the construction of a bath.
The planer was purposefully chosen from the whole variety of planers presented in hardware stores and online stores. The goal was: to find a powerful planer, preferably inexpensive, with a minimum backlash, a sufficient width of the knives for the most “traveling” wood materials (boards and timber). Also desirable was the possibility of sampling a quarter and installing an electric planer in a stationary version.
If you do not plan to carry out very large-scale construction work using a planer, such as planing a large number of boards and timber, and you need a planer for periodic household work, then there is no point in buying an expensive powerful tool.
For small jobs, when occasionally it is necessary to plan a lath or a small board, and of a small size, it is better to purchase a small planer with a relatively small engine power, but at an affordable price.
As such a tool, it can be used for a home set of planers HAMMER RNK600. This model is small and compact. The engine power is quite small - only 600 watts, but this is quite enough for small household work.