For those people who decide to work with metal, a grinder will be an obligatory tool in their work. Although it would be more correct to call it an angle grinder, the name grinder in Russia somehow took root much more firmly.
If you plan to work with thick metal (wall thickness more than 3 mm), then it is better to take a more powerful and larger grinder, with a disk with a diameter of 230 mm, but for homework, so to speak, where they mainly use professional pipes with a wall thickness of 1.5 mm or 2 mm, a small grinder with a circle diameter of 115 mm or 125 mm is better suited.
One of these inexpensive angle grinder models is the HAMMER USM600A.
This grinder will suit most non-professional workers with metal. This angle grinder has
600W motor. Of course, it is not enough for cutting thick metal, but it will cope with professional pipes calmly.
This grinder is quite light - only 2.1 kg. During operation, it can be easily held even with one hand. The second hand will be free and you can hold the workpiece with it. Very convenient when there is no workbench and vise.
The HAMMER USM600A is equipped with standard abrasive wheels with a diameter of 125 mm. In this case, you can choose a circle for both metal and stone. If you need not to cut the metal, but to grind it, you can install a grinding wheel, which is thicker.
Like all angle grinders, this model is protected by a special protective casing.
The grinder has a multi-position handle that can be installed on the convenient side of the tool, both under the right and left hand.
The grinder's engine provides 11,000 rpm.
Specifications Angle grinder HAMMER USM600A
Power grinder: 600 W
Maximum speed: 11000 rpm
Power supply: from the mains 220 V
Circle diameter: 125 mm
Landing circle diameter: 14 mm
Tool weight: 2.3 kg
Weight angle grinder: 2.1 kg
Warranty: 36 months