The HAMMER PRT650A perforator can be assessed as an average tool in terms of price and technical parameters. Despite the relatively small engine power and light weight, it has 3 modes of operation.
Thanks to this, using this model of a puncher, you can easily make holes in steel, plastic, wood, concrete, brick, etc. If necessary, using this puncher, you can make strobes for electrical wiring in plaster or soft wall blocks, and old ceramic tiles or break a brick wall.
The specified puncher is suitable for a wide range of repair and construction work.
With a power of 650 W, it is capable of delivering power up to 2.2 J in the main mode or crushing mode.
The tool is perfect as an addition to the main tool kit for most people who
used to doing a lot of construction work on their own.
For industrial construction, this tool will not be powerful enough, but it is quite suitable for small finishing teams.
This rotary hammer is equipped with a standard SDS-plus chuck, which significantly speeds up the replacement of drills or chisels.
The HAMMER PRT650A rotary hammer model has a reduced noise level compared to most models, which is very convenient when you work in a closed room, such as an apartment.
Separately, it is worth noting the excellent system for protecting the internal mechanisms of the perforator from dust, which is very abundant during operation. In addition, all conductive elements have double reliable insulation.
The tool is powered from a conventional household power supply of 220 V. At the same time, the puncher has a 3-meter cord, which is not always enough, so you should take care of carrying it in advance.
In order to prevent the tool from failing when the drill is jammed, manufacturers have provided a safety clutch in the design. Well, with the help of the reverse function, you can easily remove the drill from the hole.
The body of the perforator is made in black and green. At the same time, the control buttons and the reverse switch are made of bright red plastic. The only exception is the drilling mode switch. Due to the bright color, the switching elements are clearly visible on the housing. Also striking is the fact that the cartridge is also bright red.
Slots for the exit of air that cools the engine are located in the rear upper part of the case.
Technical characteristics of the hammer HAMMER PRT650A
Perforator power: 650 W
Number of modes: 3
Number of speeds: 1
Maximum speed: 1000 rpm
Number of strokes: 4850 rpm
Impact force: 2.2 J
Reverse function: yes
Chiseling mode: yes
Electronic speed control: yes
Safety clutch : yes
Chuck type: SDS+
Maximum drilling diameter:
- metal: 13 mm
- wood: 30 mm
- stone: 24 mm
Hammer drill weight: 3.3 kg
Warranty: 36 months