Describing this model of the EINHELL BT-AG 1000 grinder, we immediately note that its power, taking into account the fact that it is designed for cutting with a disc with a diameter of 125 mm, is quite serious - 1010 watts. Cheaper analogues have a power of 850 to 950 watts.
If you need this tool for domestic needs: well, sometimes you can cut a piece of iron or a tile, then you can buy the cheapest one, but if you plan to use it for cutting thick enough steel, then don’t buy less than 1000 W. The difference between the operation of a low-power and normal angle grinder is quite noticeable, especially small. If you apply a lot of force when cutting with the same 850 W machine, you feel how the disc slows down and the engine starts to “pull”.
But back to the description of our model.
Like other angle grinders, this one is designed for cutting various metals and stone, as well as for stripping and grinding.
The grinder's engine is capable of spinning up to 11,000 rpm.
To protect the worker from pieces of abrasive and metal or stone chips, the grinder has a special protective cover. It can be adjusted to the desired position and fixed with a special screw.
This casing can be installed in any position, so the angle grinder can be used by both right-handed and left-handed people. You can also cut it so that "sparks" fly from a person or to him. In the process of adjusting the casing, you also need to set the handle to the position that is most convenient. This model has 3 of them and they are threaded bushings mounted into the body, into which the handle is screwed.
The body of the grinder is rubberized and the hand, when you hold it by the body, does not slip even in hot weather. Rubberized inserts cover most of the instrument's plastic body.
Due to the small size of the EINHELL BT-AG 1000 angle grinder, it can be used in confined spaces, for example, to cut reinforcement or a bolt where it is not possible to climb with any tool.
To replace the disk, there is the possibility of a spindle lock. By pressing the button, simply unscrew the fixing nut with a special key and remove the disk, and then put the one you need. A special key is included in the kit and in order not to lose it, we recommend that you immediately fix it on the power cord using a plastic clamp.
The power supply of the indicated model of the angle grinder is made from a conventional household electrical network of 220 V.
The body of this model grinder is made in black and blue, with the exception of the metal part, which is silver. The creators of this model did not deviate from the rule to color the controls, but they did it not from bright red plastic, like most manufacturers, but from bright turquoise.
Specifications EINHELL BT-AG 1000 angle grinder
Power angle grinder: 1010 W
Maximum speed angle grinder: 11000 rpm
Power supply: from the mains 220 V
Circle diameter: 125 mm
Landing circle diameter: 14 mm
Weight angle grinder: 2.4 kg
Package weight: 2.66 kg
Warranty: 12 months