The STAYER SJS-620-70-E jigsaw is a fairly powerful tool.
Its power is 620 watts. At the same time, the saw stroke rate reaches 3000 strokes / min. Such a tool will be far from superfluous in the set of even a workshop that is good by the standards of our time.
With the help of an electric jigsaw, you can not only saw off a piece of board, but also saw through thick enough metal, plastic, various artificial materials, and much more.
Due to the design and location of the saw blade - saw blade, you can cut on sheet material of unlimited area. In addition, due to the small size of the file, with a jigsaw you can carry out not only a rectangular cut of the material, but also curved cuts, including along a fairly small radius.
According to the parameters declared by the manufacturer, with the help of this jigsaw it is possible to saw wood up to 70 mm thick and metal up to 7 mm thick. However, we immediately want to warn that these are rather theoretical values.
The fact is that when cutting a thick board, for example, due to a large bending load, it is very difficult to obtain a perpendicular cut. The file will in any case be diverted to the side, and if the cut is carried out along the fibers, then you will cut 1 cm per hour.
For thick steel, this power tool is not intended at all, it is much easier to use an ordinary grinder for these purposes - it will turn out many times faster and more accurately.
If we return to the description of the jigsaw, we note that it has a European EU-type saw blade shank. This means that you do not have to worry about the fact that the purchased files will not fit your power tool.
The case has a modern ergonomic design and is very comfortable to work with.
For quick blade changes, the jigsaw has a keyless chuck.
The tool has electronic adjustment of the frequency of the stroke of the file, as well as three modes of the pendulum lever. The pendulum mechanism provides a clean and fast cut for various material densities.
The sole of the jigsaw is adjustable. The angle at which you can set the tilt from -45 to 45 degrees.
In order not to get tired of the finger that presses the start button, the tool also has a button for fixing the switch. That is, he pressed it and drank with the constant work of the canvas.
To permanently remove sawdust, a vacuum cleaner can be connected to the vacuum cleaner through a special nozzle.
We also note the presence of illumination of the place of the cut, which is very convenient, especially if the light source is located at an uncomfortable angle to the table on which the work is carried out.
Technical characteristics of the jigsaw STAYER SJS-620-70-E
Jigsaw power: 620 W
Maximum stroke frequency: 3000 per minute
Maximum cutting thickness:
- metal: 7 mm
- wood: 70 mm
Pendulum stroke: yes
Number of pendulum stroke positions: 3
Work area illumination
:
yes : yes Ability to connect to a vacuum cleaner: yes
Sole type: stamped
Jigsaw weight: 2 kg
Warranty: 24 months