Русский | English | Український

UShM (Bulgarian) DIOLD MSHU-095-125In this article, we want to describe another model from the class of small angle grinders for a disc with a diameter of 125 mm, namely the angle grinder DIOLD MSHU-0.95-125. This model has a 950 W motor, which is quite enough to perform various types of work in a small amount. That is for home use.

The engine allows you to develop 11000 rpm, which is enough to get a smooth polished surface, not to mention cutting a metal pipe or corner. The engine of the grinder is a collector single-phase. The weight of this grinder is 1.8 kg.

Using the DIOLD MSHU-0.95-125 grinder, you can cut metal of a sufficiently large thickness: up to 10 mm. On the shoulder of this angle grinder there will also be ceramic tiles of various thicknesses, slate, cement chipboard, etc. True, in the latter case it will be necessary to use a respirator and goggles.

The fact is that there will be a lot of dust during the processing of stone materials. In a closed room, it is generally better not to perform such work.

With the help of this model of grinder, you can remove the old paintwork from metal parts, plastered surfaces and even wood. True, for this you will need to use special nozzles with glued sandpaper or in the form of a wire brush. By the way, a wire brush differs in the metal used and can be used either for wood or metal.

LBM DIOLD MSHU-0.95-125 is not a professional tool, so it cannot be used continuously for a long time. The mode of operation of this model is 15/5. That is 15 minutes of work with a mandatory break of 5 minutes. Otherwise, the engine may overheat and fail.

The grinder is powered from a conventional household power supply with a voltage of 220 V and a frequency of 50 Hz.

In our opinion, it is worth stopping your eyes on the appearance of this instrument. It stands out from a number of similar tools. The designers decided to make the back of the grinder in the form of a full-fledged external handle with protrusions for the fingers. The empty button is very long and is located along the entire length of the back of the angle grinder. It is necessary to press it during operation with the fingers of all hands that holds the grinder. In front of the start button there is a small trigger for fixing the button.

In our opinion, the creators of the model with the described bells and whistles went too far, but perhaps there are connoisseurs of this particular design. At the same time, we find such a layout of control buttons inconvenient, especially when it will be necessary not to grind, but to cut metal, since you constantly have to turn and hold the brush in this position at an angle of 90 degrees, which is very inconvenient.

External overall dimensions of the described model in mm 320x135x110. The service life declared by the manufacturer is 5 years.

Technical characteristics of the grinder DIOLD MSHU-0.95-125

Angle grinder power: 950 W
Power supply: from the mains 220 V
Maximum speed: 11000 rpm
Circle diameter: 125 mm
Circle seat diameter: 14 mm
Electronic speed control: yes
Package weight: 3 kg
Grinder weight: 1.8 kg
Warranty: 12 months

 

Other models of grinders

Additional Information

en UK
Для любых предложений по сайту: [email protected]