If you need a perforator in your home kit, then you will surely be pleased with the purchase of a perforator from the Makita model range, in particular: Makita HR 2450 perforator.
This model is a professional tool and can be used during intensive construction and finishing works. The tool has three modes of operation. In addition to chiselling stone materials, you can also drill various materials with this rotary hammer. Starting from concrete and brick, for which the hammer drilling mode is suitable, and ending with wood, plaster, etc.
This tool has a built-in block for adjusting the rotation speed of the drill, which ensures comfortable drilling of various materials (by density) without significant wear on the mechanisms of the puncher. Also in the puncher Makita HR 2450 there is a reliable disengagement mechanism (coupling). It protects your hands from a sharp blow if the drill jams while drilling in a concrete or brick wall. There is also a system
blocking in case the tool is disconnected from the network. Separately, it is worth noting a reliable and effective dust protection system for the internal elements of the puncher. It is thanks to her that the wear of the rotary hammer motor from dust ingress will occur much more slowly.
The punch itself has a comfortable ergonomic handle with an anti-slip surface. The control buttons allow you to start and stop the tool, as well as turn on the reverse during operation. 
Included with the tool are: an additional handle, which will not be superfluous when drilling walls with large-diameter drills; depth stop for drilling blind holes of a given depth.
The tool itself is sold in a convenient case, where both the punch itself and additional accessories are placed. The weight of the tool in the case is 4.6 kg with dimensions of 410 x 310 x 100 mm. With such a weight, even a not very strong person (physically) can quite calmly perform various work with it.
Externally, the Makita HR 2450 puncher is made in the classic color scheme for this manufacturer: black and blue. The tool has a classic layout with a horizontal engine. Equipped with a standard chuck for Sds-plus drill shanks. That is, the replacement of the drill can be done in a matter of seconds. Pull out one drill and install another.
Slots for the removal of hot air from the engine through special slots in the rear of the housing. If you need to drill while holding the tool in front of you at eye level, this may not be very convenient, as the dust will fly directly into your eyes. This problem can be easily overcome by wearing protective goggles.
Specifications perforator Makita HR 2450
Number of operating modes: 3 pcs;
Maximum impact force: 2.7 J;
Tool power: 780W;
Cable length: 4 meters;
Weight: 2.4 kg;
Availability of reverse: yes;
Maximum drill diameter (concrete): 24 mm;
Maximum drill diameter (metal): 13 mm;
Maximum drill diameter (wood): 32 mm;
Impact frequency: 4500 beats / min;
Shank type: Sds-plus;
Vibration protection: yes;
Second cartridge: yes;
Other models of rotary hammers
|
Useful articles |