In this article, we decided to talk about one of the Makita brand thermal gun models. In particular, we will talk about the HG5012K model. In general, all power tools of this brand are considered quite reliable. It is used both in domestic construction and repair, and by professionals who earn their bread by construction. A thermal gun is also sometimes called a building hair dryer, since, compared to a conventional hair dryer, it is similar in design and purpose.
The Makita HG5012K thermal gun is designed to create a stream of hot air for various construction purposes. With this heat gun, you can remove a layer of old paint from the coating, defrost frozen water or sewer pipes, as well as for other purposes. For example, gluing, heating plastic products to give them the necessary shape, and finally for the banal drying of the surface from moisture.
In this article we want to talk about such a tool as an electric soldering iron . This tool is the only one with which a competent person can repair a failed household appliance at home.
It is an electric element with a heating element, designed to apply solder to wires and contacts, when creating various electrical circuits and connecting wires. Structurally, an electric soldering iron consists of a wire with which it is powered from a conventional electrical network with a voltage of 220 W, a handle (body), a heating element and a tip.
Depending on the power and shape of the soldering iron tip, they are intended for various soldering jobs. So small soldering irons, power from 5 to 40 W are used for soldering various electronic boards, connecting small electrical circuits. They use small sharp stings, as they are more convenient to apply solder to the soldering point. Various tin-lead solders are used as solder.
In this article, we decided to talk about such a tool as a tester screwdriver. Almost every person who has encountered the work of installing electrical wiring, replacing electrical wiring, installing a new electrical outlet, etc. know what instrument it is.
In the classic view, this is a small screwdriver, inside of which there is a small LED that shows whether there is a phase on the wire that you touch with this tool. Accordingly, the second wire in the same outlet will be zero. It can only be determined using the elimination method.
Classic screwdriver testers are designed for use in AC 220 volts. This is the normal voltage for a household electrical outlet. For the convenience of using a screwdriver with a tester, there is a special clip on the handle - a clip. Electricians usually cling it to their breast pocket so that, firstly, they don’t lose it, and secondly, it is always at hand - very convenient.