In the line of rotary hammers of almost any manufacturer of construction tools, there are so-called amateur models. They are distinguished by a fairly affordable price, a small weight, a set of functions sufficient for carrying out basic work with this tool during construction and repair in small volumes, which we can observe almost everywhere.
One of these tools is the BORT BHD-650 perforator model.
This rotary hammer has a weight of only 2.4 kg and a power of 500 watts.
In this case, the rotation of the drill reaches 1550 rpm.
This drill has 3 modes of operation. That is, you can carry out conventional drilling in hard materials, ranging from steel to wood and plastic. True, for this you need to buy
If you need an inexpensive hammer drill for your home and you do not plan to use it in a busy mode, then you should definitely look at the INTERSKOL P-18/450 ER rotary hammer.
This domestic instrument, of course, is inferior in many respects to instruments of foreign manufacturers similar in this class, but they are also more expensive.
The described model of the perforator has a very low power - only 450 watts.
For this power, in our opinion, it has a large weight - 3.25 kg, which, if used only occasionally, is not critical.
To reduce the cost of the product, the designers, when developing this model, left only 2 modes of operation.
That is, the puncher can work in the main mode: impact drilling, which is required in order to
Every real owner who is used to doing at least part of the construction and repair work with his own hands in his house should have an appropriate set of tools. It was only earlier that they built with one hammer and an ax. Modern building materials include a large number of different building specialized tools, including electrical ones.
One of such necessary and important tools in a home kit is a puncher.
This tool is designed primarily for drilling holes of various diameters in walls made of stone materials such as concrete, brick, natural stone and others.
Well, now let's move on to the description of the perforator model stated in the title of the article: HAMMER PRT620C PREMIUM.
A puncher in a home tool kit, in our opinion, should be a must. It is clear that a modern good electric drill with the function of impact drilling with holes in the same concrete or brick wall will cope without much difficulty. However, if you need to drill large diameter holes for plastic heating and plumbing pipes, or even make holes for sewers, then an electric drill will be useless.
Moreover, drilling may not work precisely because of the large size of the hole. You need a perforator and it must have a crushing mode. Most small rotary hammers usually do not have this feature, but if you search well in hardware stores, you can certainly find a relatively inexpensive rotary hammer with 3 modes of operation.
The HAMMER PRT650A perforator can be assessed as an average tool in terms of price and technical parameters. Despite the relatively small engine power and light weight, it has 3 modes of operation.
Thanks to this, using this model of a puncher, you can easily make holes in steel, plastic, wood, concrete, brick, etc. If necessary, using this puncher, you can make strobes for electrical wiring in plaster or soft wall blocks, and old ceramic tiles or break a brick wall.
The specified puncher is suitable for a wide range of repair and construction work.
With a power of 650 W, it is capable of delivering power up to 2.2 J in the main mode or crushing mode.
The tool is perfect as an addition to the main tool kit for most people who
In this article, we want to talk about another model of a popular and useful tool in the household - a grinder, or how this tool is correctly called - an angle grinder (angle grinder).
It's about the grinder BORT BWS-905-R.
If we consider for starters in general terms, then this model is small in size with a light weight of 1.8 kg. A typical standard disc size with a diameter of 125 mm is installed on the tool. At the same time, it is possible to install on the grinder both circles for cutting and grinding metal products and blanks, and discs for cutting stone materials.
The BORT BWS-905-R angle grinder is equipped with a 900 W motor, which is quite good for this size. The tool is powered from a 220 V household power supply, while the engine allows you to develop a frequency
Almost every man had to cut some kind of material in his life: wood, plastic, metal, etc.. They did this either with the help of an ordinary hacksaw, if it was wood or various materials based on it, hacksaws, if you sawed metal parts or sheet metal, grinder or other materials.
One of the tools has to be cut for a long time and with great physical effort, others are faster - all the same grinder. In general, power tools cut material much faster and more conveniently, although they are usually quite specialized in the type of material or the dimensions of the sheet or part.
One of the versatile power tools that can be used for most of the different materials that you may need in construction and repair is a jigsaw.
For those people who decide to work with metal, a grinder will be an obligatory tool in their work. Although it would be more correct to call it an angle grinder, the name grinder in Russia somehow took root much more firmly.
If you plan to work with thick metal (wall thickness more than 3 mm), then it is better to take a more powerful and larger grinder, with a disk with a diameter of 230 mm, but for homework, so to speak, where they mainly use professional pipes with a wall thickness of 1.5 mm or 2 mm, a small grinder with a circle diameter of 115 mm or 125 mm is better suited.
One of these inexpensive angle grinder models is the HAMMER USM600A.
This grinder will suit most non-professional workers with metal. This angle grinder has
A grinder or how to properly call an angle grinder is a very important tool for working with metal. It is this tool that is most in demand when working with metal, both sheet and in the form of professional pipes. Perhaps more important is the welding machine.
Also, a grinder is often needed for cutting various finishing materials such as slate, corrugated board, plastic materials, etc. In general, if you can even saw thin wooden blocks carefully, the main thing is not to put a disk from a circular saw.
For a home set, it makes little sense to take a very expensive angle grinder.
An inexpensive model is also quite suitable. One of such cheap models is the grinder SKIL 9035 LA. This angle grinder is equipped with a 600 W motor, which ensures the rotation of the disk with a frequency