If you need to level various surfaces of wooden blanks, then you cannot do without such a necessary and important tool as a planer. With an ordinary planer, especially if the amount of planing is large enough, it will be quite difficult to cope with the work. In this regard, an increasing number of people prefer to purchase electric planes powered by a 220 V household network for these works.
The performance of an electric planer compared to its manual counterpart is many times greater and it requires much less physical effort.
Well, now let's move on to the immediate topic of our article - the description of the planer DIOLD RE-850-01 850 W.
The described electric planer has a sufficiently large power, which allows planing wooden blanks to a depth of 0 to 3 mm. Of course, the maximum depth of planing is suitable
Electric jigsaw KOLNER KJS 450 with a power of 450W is one of the cheapest models on the market for this type of power tool.
In principle, it has the same design and principle of operation as its more expensive counterparts.
In the description of online stores, you will most likely read that the jigsaw of this model provides convenience and good cutting accuracy. But this is debatable.
In principle, this electric jigsaw is equipped with a sufficiently powerful engine for its price, and a sufficiently large cutting depth is declared both for wood and when cutting metal. But 6 mm of metal is difficult to cut even with a grinder specially designed for this, and even for a jigsaw this is generally unrealistic. Yes, and not every circular saw can cut through 55 mm of wood, and not only because of the small size of the disc. Just the power of the engine will allow you to cut this material of similar thickness very slowly.
If we consider the question of the difference between a puncher and a drill, then these are essentially completely different tools, although they can replace each other in most cases. The concept of a drill-hammer does not exist in nature, however, according to the Enkor company, they offered for sale just such a tool - the ENKOR PE-420/12ER Hammer Drill. As they say, the power of a hammer drill is combined with the lightness of an electric drill.
Actually this is an illusion. And why we will tell in this article.
Let's take a closer look at the technical characteristics of this tool and you will understand that this is not so.
This perforator, namely, it is still a perforator, since it has an electro-pneumatic mechanism and it is equipped with a special SDS + cartridge for perforator drills. The tool has two modes of drilling: with impact and without impact.
The STURM RH2550 perforator is a small model for the perforator class, which is quite suitable for home use. That is, sometimes drilling a few holes in the walls in order to hang curtains or cabinets, and even for small construction, if there is no work to be done on durable reinforced concrete, it will be enough.
The motor power of the STURM RH2550 rotary hammer is small, only 550 watts. If we compare it with Russian high-power electric drills, then it will even be inferior to many. But as they say, a hammer drill is still not a drill with a hammer drilling function and is much better suited for drilling stone materials.
The impact energy of the drill of this perforator is 2 J, and the maximum hole size when drilling with a drill is up to 20 mm. By the way, the impact energy is quite small, and if you have to drill concrete with a drill more than 6 mm, then a lot of effort will have to be applied.
We decided to devote this article to one of the Russian electric drills, or rather the IE-1035 electric drill produced in Rostov.
This drill is not a professional tool, but it is intended for use during fairly large loads in construction and repair.
The drill has a durable metal body. Thanks to this, it is not afraid of falls, although it is much heavier than imported drills of similar power. All components used in this drill are Russian-made.
The electric drill is equipped with a metal three-jaw chuck PS-16. By the way, you cannot insert a drill more than 14 mm into an imported drill, they simply do not put such cartridges on them.
The Bosch PCL 10 laser level, despite its small functionality, will certainly be of interest to a fairly large number of people who want to buy it for their tool kit. It is very easy to apply and operate. Due to the fact that it is intended for marking with cross lines (one horizontal, the other vertical), it is primarily a finishing tool.
Given the short distance that the laser level beams reach, this tool is not advisable to use in construction, especially large buildings and structures, but when finishing small rooms like apartments or individual rooms, it will be quite enough. With the help of the Bosch PCL 10 laser level, you can mark when laying floors, installing partitions, installing windows and doors, laying wiring, and various other works during the repair or decoration of premises.
In this article, we want to talk about another tool from the famous Bosch company, namely a cordless drill - a Bosch PSR 14.4 LI screwdriver. The numbers and the last two letters of the marking indicate the voltage of the screwdriver batteries, as well as the type: lithium - ion.
In general, in a home tool kit, a drill - a screwdriver is very necessary. This tool for the needs of the home combines a large number of screwdrivers of various types and sizes, as well as a classic drill. Thanks to the batteries, it can be used not only in the apartment, but also on the road, in the country, in the absence of electrical outlets nearby, and in construction, for example, on the roof. The lack of binding to the outlet saves you from having to pull a long wire to it. But now directly to the description of the tool itself, its characteristics and capabilities.
The Bosch PSR 14.4 cordless drill driver is primarily designed for screwing fasteners:
In the process of overhauling an apartment, or finishing it in the case of buying an apartment in the so-called "rough finish", as a rule, one of the first works is the replacement or laying of new electrical wiring. If you have enough of your own knowledge and skill to do most of the new wiring work, of course it's best to do it yourself. In this way, you can save a fairly large amount of money, since these works are quite expensive, and if necessary, you can always change the layout of the future electrical network, and we think that everything will be done much more accurately than hired workers.
In the course of laying electrical wiring along the walls of a residential apartment, the lion's share of all work, and the most difficult and dusty, is wall chasing. For those who do not know: a strobe is a special groove for wire or other communications so that they do not protrude beyond the plane of the wall, floor or ceiling.
In this article we want to talk about one of the models of laser levels by ADA.
We're talking about a laser level. More precisely, we will talk about its three modifications, which differ in the number of rays and projections. To begin with, we note that this level is primarily focused on master finishers. It will not be superfluous in the set of a home master. There are three models in the ADA 3D line: ADA 3D LINER 2V, ADA 3D LINER 3V and ADA 3D LINER 4V.
The picture below shows how different the ray construction planes are for these models. Except for the difference in planes, this is the same level. Models differ by 1 - 2 thousand rubles from each other. But let's say right away that if you do not buy the ADA 3D LINER 4V model, then over time you will definitely begin to regret it. The difference in one plane or its insufficient development to the maximum angle with a large number of constructions is reflected in the course of construction and finishing in the form of additional time spent, loss